Elevating traditional event technology with a range of dynamic motion solutions.
Protec automation department is designed to offer corporate, live events, and exhibitions the latest and most innovative technologies including modular revolving platforms that can be built up to a maximum diameter of 30m.
Equipment
Turning
500mm High Revolves
A range of varied diameter revolves @ 500mm high
Diameter: 6.6m, 11m, 15.4m, 19.8m, 24.2m, 30m – Other custom sizes can be arranged at an additional cost
Weight loading: Total distributed load for 30m size is 55000kg; Point load of 300kg/m2; Higher UDL’s and higher point loadings of around 1000kg/m2 achieved by double skinning
Rotation: Smaller sizes unloaded can be driven to 0.8 revolutions per minute (RPM); Fully loaded or at 30m are capable of 0.4RPM
Diameter: 6.6m, 11m, 15.4m, 19.8m, 24.2m, 30m – Other custom sizes can be arranged at an additional cost
Weight loading: Total distributed load for 30m size is 55000kg; Point load of 300kg/m2; Higher UDL’s and higher point loadings of around 1000kg/m2 achieved by double skinning
Rotation: Smaller sizes unloaded can be driven to 0.8 revolutions per minute (RPM); Fully loaded or at 30m are capable of 0.4RPM
Turning
300mm High Revolves
A range of varied diameter revolves @ 300mm high
2m / 4m / 6m / 8m diameter
Weight loading: Total distributed load for 8m size is 5000kg; Point load of 1000kg/m2
Speed: Unloaded can be driven to 1.8 revolutions per minute (RPM); 8m size fully loaded is capable of 1RPM
2m / 4m / 6m / 8m diameter
Weight loading: Total distributed load for 8m size is 5000kg; Point load of 1000kg/m2
Speed: Unloaded can be driven to 1.8 revolutions per minute (RPM); 8m size fully loaded is capable of 1RPM
Lifting
ROLL UP SCREENS
Large Roll Up system for fabrics in theater, shows and stage.
Move your fabric or curtain up and down. Easy controlling from the lighting desk. Simple display menu for configuration.
Position, speed and operating range can be controlled using the integrated DMX interface.
LCD display with simple menu for adjusting the DMX channels, motor parameters and functionality.
Move your fabric or curtain up and down. Easy controlling from the lighting desk. Simple display menu for configuration.
Position, speed and operating range can be controlled using the integrated DMX interface.
LCD display with simple menu for adjusting the DMX channels, motor parameters and functionality.
Lifting
DMX Winch 50 (Wahlberg)
The Winch 50 is a great winch for lifting and moving stage props, screens, drapes, lights, etc. in and out of the stage area.
Load: 50Kgs SWL
Load: 50Kgs SWL
Lifting
Wire Winches
Protec has a selection of different winches available to cater for almost any scenario in the events industry. We have winches for performer flying, high speed set movements, heavy lifting (up to 2t), pile wind lifting.
Lifting
Half Ton Electric Lifting Platforms
Protec’s electric lifts are designed to work “standalone” for an artist entering from underneath the stage, or together for raising large set or stage elements. The electric lifts can be connected to a standard motor controller to run fixed speed or connected to our automation platform to enable them to run variable speed with positioning. 1m x 2m
In dolly: 650-3450mm
Out of dolly: 400-3200mm
2.8m of travel
0.55mm/sec @50Hz
Load: 500Kgs
Finished in black with 22mm heavy duty ply on top.
Dolly frame is equipped with screw-jacks for leveling.
In dolly: 650-3450mm
Out of dolly: 400-3200mm
2.8m of travel
0.55mm/sec @50Hz
Load: 500Kgs
Finished in black with 22mm heavy duty ply on top.
Dolly frame is equipped with screw-jacks for leveling.